News

Company News

Current Location : Home > News > Company News
Products

After reading these, the dangerous waste sludge drying machine is not afraid of agglomeration.

After reading these, the dangerous waste sludge drying machine is not afraid of agglomeration.

  The hazardous waste sludge drying machine adopts the principle of DC vortex and AC reciprocating to carry out sludge treatment, which greatly improves the working efficiency. Due to various factors, agglomeration is likely to occur during sludge treatment, which will affect the entire process of sludge treatment. What should I do if I encounter this situation? Suzhou dangerous waste sludge drying machine manufacturer: When encountering the agglomeration situation, it can be solved by modifying the equipment, adding the dispersing device and cleaning device. Next, we can take a detailed look at these three methods.

  1. If you are using a traditional drying equipment, you may wish to make a new transformation to the equipment. For example, a large piece of stir-fry board is made of high-quality high-temperature resistant material, and the sludge is dispersed and then moved to the next step. This method is to achieve evaporation of water by contacting the sludge with the frying board, and the sludge can be greatly reduced. Water content.

  2. If you have already adopted a new drying equipment, you may wish to add a dispersing device to the drying cylinder. The drying equipment with the dispersing device is more efficient, and the high-speed operation device increases the contact area between the sludge and the hot air, and the sludge is largely dispersed. Such a professional configuration is difficult to agglomerate. .

  3. Another method is to add a cleaning device to the drying cylinder. This method can be difficult to achieve on conventional drying equipment. Now this modification can expand the application of hazardous waste sludge dryers, not only to dry other high-viscosity and easy-to-knot materials. In the past, the sludge adhered to the wall of the drying cylinder and was attached to the surface by high temperature baking. The dispersing device was not touched, and it was difficult to clean it, which caused a headache.

  What should I do if the hazardous waste sludge drying machine is agglomerated? It is easy to solve this problem by implementing a multi-functional device. It is difficult to make a cake in the future. In the era of rapid development of technology, the hazardous waste sludge drying machine solves the annoying problem of sludge pollution and creates a good living environment for human beings.

  Suzhou Xinkunyuan Environmental Protection Technology Co., Ltd. is a professional environmental protection technology company, long-term operation of sludge low-temperature box dryer, hazardous waste sludge drying machine, industrial hazardous waste sludge drying machine, hazardous waste sludge dewatering equipment, low temperature box A series of high-quality products such as dryers, complete product range, affordable, quality assurance, welcome to consult: 0512-62512037.